Automatic Veneer Roller Drying Machine

The biomass burner is Shine patented product. It can burn all kinds of waste wood directly to reduce the drying cost mostly. Compared to steam type or heat conduction oil type veneer dryer, the drying cost is reduced greatly.


Shine 4 deck veneer dryer is our newly developed product to meet high capacity requirements of customers; which has the salient features of higher drying capacity. The rollers use φ102 steel special shaft tube. The bearings of 4 deck veneer dryer are featured high temperature 500 degree Celsius resistance and low temperature -20 degree Celsius resistance. which no need inject oil and easy maintenance in the daily operation.

A unique heat exchange structure makes the equipment run efficiently and greatly improves drying output. Biomass burner is our patented product, which can burn waste wood (rotary cutting veneer, waste bark, and waste veneer) directly, heat air, and deliver to the dryer directly without heat loss. The fuel cost is much lower than thermal oil, steam gas, electricity, and others. The composite cost is only about $10/m³. Our biomass burner can pass the inspection and acceptance of the environmental protection department.

veneer dryerThe roller veneer drying machine adopts frequency conversion(The temperature controller is connected to the frequency converter of the traction motor )to adjust feed speed according to your veneer thickness and moisture content to achieve ideal drying effect.

four deck veneer dryer

Our patented product——The biomass burner

The biomass burner can burn waste wood veneer, scrap wood blocks, waste wood chips and waste tree branches. Fuel costs only $3.50 per cubic meter. Environmental protection departments of many countries can accept our biomas burner.

veneer dryer

1. High degree of automation, automatic loading, labor saving, automatic heating, dehumidification, high drying intensity, long drying time, high moisture saturation, and energy saving.
2. Dry evenly. The peeled veneer undergoes heat exchange and moisture removal in multiple sections, and after drying for about 1.5 hours, the moisture content is low and uniform, which can meet the production needs of veneer and plywood.
3. The output is large. According to the needs of different users and different materials, the output of the equipment can reach 1—5 cubic meters/H.
4. The equipment has large heat exchange area, fast temperature increase, large circulating air volume, many cycles, high heat exchange efficiency, high exhaust water saturation, energy saving, and low use cost, The drying equipment saves energy by more than 40% (the roller adopts the air spray method, the contact time between the hot air and the plate is short, and the heat exchange efficiency is low).
5. A piece of equipment investment can be used for more than ten years, super cost-effective
6. The equipment adopts vertical plate loading and drying. The operation time of the plate skin in the equipment is long, which can reach 1-2 hours. The temperature can be controlled according to the section. 13—-15min, the folding type veneer dryer has large output, low energy consumption and low drying cost.

Product Parameters

Parameter  Model DHS38M
Work width(m) 3
Deck 4
Veneer thickness(mm) 0.6-8
Heating area(m) 34
Drying capacity(m³/h) About 6.2
Heat exhaustion(10000 kcal) About217
Total power(kw) 150
Overall size LxW(m) 49*5.5

Customer Case

Customer Case



Customer Visits

Customer Visits

Customers from all over the world visit

Our Services

1.    The warranty period for the mechanical equipment part is one year from the start of production after installation, and the electrical part is six months.
2.    Engineer guide installation service
3.    Equipment replacement parts are available at discounted prices

Product Packaging And Transportation

Product Packaging And Transportation


About Shine

Shandong Shine Machinery Co.,Ltd has more than 100 employees. The company’s headquarters is located in Gaotang Industrial Park, a beautiful water city in the north of the river, and the production plant covers a total area of 100 mu. The company specializes in the production of wood veneer dryers, bridge formwork, automated livestock and poultry breeding equipment, special equipment for the production of construction materials, etc. With the advantages of many years of research and development, production, service and production capacity, the company has always been in the leading position in the same industry. Shine Machinery provides high performance, high quality products and one-stop service for customers, and can tailor different products to meet the needs of customers in different situations and provide customers with fast and optimized system solutions.

The company is far-sighted and implements a modern enterprise management system, making use of new sales concepts and service systems. With an annual investment of 20 million in scientific research, the company joins forces with various industrial universities in China to study the application of high-end technology, so that the various products of shine Intelligence are always at the forefront of technology in the industry. The company is very strict about the quality of its products, and every piece of equipment it produces meets the ISO9001 quality management system certification. The company has large CNC gantry milling machine, data flame cutting machine, plane mill, universal milling machine, vertical and horizontal sawing machine and other large production equipment, the introduction of foreign advanced technology, so that “Shine” equipment with reasonable design, reliable performance, high quality, low energy consumption, easy to operate, high output and many other advantages. The company’s products have won the praise of our customers for their high precision and high cost performance.


A: We are a factory who manufacture the machines by ourselves.
A: Normally will be 30 days after getting deposit or original LC.
A: 1 year after delivery. We supply telephone after-sale service, video service and e-mail service. If can not deal with the problem, our tech-staff will go abroad to service.
A:a.T/T(30% deposit, 70% before delivery in FOB or 70% paid against copy of B/L in CFR) b. 100% irrevocable L/C at sight.
A: Welcome to visit us! Everyday we have customers from different countries. By now, we have exported to more than 50 countries customer.


What is 3+3?