Biomass Type Veneer Dryers Machine

Shine heat exchanger adopts step by step heat transfer, and the specifications of each section of the heat exchanger are different, and the hot air in the heat exchanger can be uniformly emitted to the veneer.


Roller Veneer dryer is one of the main equipment in plate production. The quality of veneer drying directly affects the quality of veneer and glued products. The design of hot air continuous roller press is based on the most advanced continuous pressure contact veneer drying technology in the world. The working principle is that the veneer is clamped by the upper and lower seamless steel tube rollers, and the oven temperature reaches 140 ℃ by preheating, and then enters between the upper and lower rollers and blows high pressure hot air to the upper and lower sides of the veneer through the hot air pipe for rapid drying. So it can make the veneer smooth and moisture content even after drying, and it also has the characteristics of direct contact heat transfer between high temperature roller and wet veneer, high thermal efficiency, low heat loss and reducing heat energy consumption. 

two deck veneer dryer

The drum type: the veneer feed lengthwise, top and bottom rollers are driven by the chain, the veneer advance pressed by the top roller weight. The veneer is dried when come through the rollers and air nozzle with flat smooth surface.

Heating source system:
You can choose the heating systems according to your conditions and environments such as hot air stove, steam stove, oil stove.

Structure selection
The contour structure is metal material (iron plate, aluminum plate, stainless steel ect.) asbestos keep temperature with brick body, we can produce according to your requirement and also remake the old machines.

veneer dryer

Product Parameters

Veneer Dryer Product Parameters


1. This model is a straight-through horizontal circulation roller veneer dryer. Its thermal cycle design draws on the advantages of advanced European dryer technology, and adopts an upright centrifugal fan with a volute (flow rate of 45,000 to 62,000 m3/ h).
2. The new type of heat exchanger and the rectangular variable-section spray box make the high-speed jet airflow acting on the surface of the veneer uniform. The hot air blowers in the heating chambers in the front and rear areas are arranged separately from left to right, so as to ensure that the dried veneer obtains a consistent final moisture content at each point.
3.In order to adapt to the humid tropical climate, the length of the cooling open section is appropriately lengthened to facilitate the cooling of the dried veneer and reduce the phenomenon of damp return.

Customer Case

Customer Case



Customer Visits

Customer Visits

Our Services

Pre-sale services:
1) Provide the free consultation of all  Core Veneer Dryer Machine
2) According to the clients’ special requirement, offering the reasonable plan and free design to help to select the equipment.
3) Welcome to visit our factory

Services during the sales:
1) Inspect the machine before leaving the factory.
2) Oversea install and debug the equipment
3) Train the first-line operator.

After sale services:
1) 24 hours online service
2) Provide the VIDEO with Install and debug the equipment
3) Provide technical exchanging
4) Door to door service is possible

Product Packaging And Transportation

Product Packaging And Transportation


About Shine

Shandong Shine Machinery Co.,Ltd has more than 100 employees. The company’s headquarters is located in Gaotang Industrial Park, a beautiful water city in the north of the river, and the production plant covers a total area of 100 mu. The company specializes in the production of wood veneer dryers, bridge formwork, automated livestock and poultry breeding equipment, special equipment for the production of construction materials, etc. With the advantages of many years of research and development, production, service and production capacity, the company has always been in the leading position in the same industry. Shine Machinery provides high performance, high quality products and one-stop service for customers, and can tailor different products to meet the needs of customers in different situations and provide customers with fast and optimized system solutions.

The company is far-sighted and implements a modern enterprise management system, making use of new sales concepts and service systems. With an annual investment of 20 million in scientific research, the company joins forces with various industrial universities in China to study the application of high-end technology, so that the various products of shine Intelligence are always at the forefront of technology in the industry. The company is very strict about the quality of its products, and every piece of equipment it produces meets the ISO9001 quality management system certification. The company has large CNC gantry milling machine, data flame cutting machine, plane mill, universal milling machine, vertical and horizontal sawing machine and other large production equipment, the introduction of foreign advanced technology, so that “Shine” equipment with reasonable design, reliable performance, high quality, low energy consumption, easy to operate, high output and many other advantages. The company’s products have won the praise of our customers for their high precision and high cost performance.


A: We are a factory who manufacture the machines by ourselves.
A: Normally will be 30 days after getting deposit or original LC.
A: 1 year after delivery. We supply telephone after-sale service, video service and e-mail service. If can not deal with the problem, our tech-staff will go abroad to service.
A:a.T/T(30% deposit, 70% before delivery in FOB or 70% paid against copy of B/L in CFR) b. 100% irrevocable L/C at sight.
A: Welcome to visit us! Everyday we have customers from different countries. By now, we have exported to more than 50 countries customer.


What is 3+3?