Mesh Belt Dryer System
JETTING MESH VENEER DRYER adopts the way of transverse-circulating vertical-jetting, it is made up of the conveying system, heating room, heat face veneer after drying has the uniform moisture content, flat with no buckle or end waviness. The surface is in good condition before gluing into plywood.
Description
Product Description
This veneer drying machine / veneer dryer is mainly used to dry rare furniture veneers, sliced veneers, surface veneers of parquet and so on. Stainless steel mesh belt has been used to prevent pollutions to the veneers. Mesh belt face veneer dryer is a closed-belt dryer. Its feature is that only the in feed end and the discharge end are open, and the other sections are sealed. Hot air flows through the equipment and the heat loss is low, which can save a lot of energy. The equipment is flexible in configuration, and there are many materials for drying at one time, and it can be continuously produced and dried, which is convenient to use and greatly reduces labor. The structure is simple, easy to install, can run for a long time, can enter the interior of the box for maintenance when the fault occurs, and the maintenance is convenient. Good for thin veneer dryer, such as 0.2mm, 0.4mm, 0.6mm veneer. It can be combined with roller veneer dryer as well. Mesh belt dryer is a closed-belt dryer. Its feature is that only the feed end and the discharge end are open, and the others are closed. Hot air flows through the equipment and the heat loss is low, which can save a lot of energy.The equipment is flexible in configuration, and there are many materials for drying at one time, and it can be continuously produced and dried, which is convenient to use and greatly reduces labor. The structure is simple, easy to install, can run for a long time, can enter the interior of the box for maintenance when the fault occurs, and the maintenance is convenient.
The mesh belt dryer machine for plywood is the main machine in the plywood industry and is used to remove moisture from the veneer. The heat medium can be thermal oil and heat steam which can be produced according to the customer’s requirement. The whole machine can be divided into four parts: in feeding section, the heating section, the cooling section and discharge section. All the instructions can be operated in switchboard. The specific requirements can be done according to customers’ production requirements. Mesh veneer dryer is used for drying sliced or peeled veneer in the veneer production line. The machine consists of inlet, drying area, cooling area, outlet. Dryer size is customized according to the production capacity, process and space, in order to improve productivity with lowest investment.
Veneer mesh dryer is a professional drying machine especially for the face veneer thickness of 0.2-0.6mm. It is a very good dryer machine for the face veneer-making factory. Usually, the continuous veneer ribbon is dried firstly and then cut into the required size to get the biggest yield. The face veneer after drying has a uniform moisture content, flat with no buckle or end waviness. The surface is in good condition before gluing into plywood. This machine adopts centrifugal blower and radiator of steel & aluminum composite type. The blower is mounted on the top of machine and it has the feature of large air volume and stable. The radiator has the features of good wind resistance and large heat radiation area. The thermal air blower is mounted at each side of the machine. When the heated air flow comes into the special spray tanks, they could be spray evenly onto the veneer surface with high speed. So that the veneer could reach perfect moisture content and get almost the same moisture content on both sides of veneer. The mesh belt type veneer dryer machine is main equipment for veneer making in plywood factory, it is mainly used to dry the decoration veneer. It is composed of the front driving frame and the back driving frame, the dryer area and the cooling area.The standard dryer machine area has 11 sections and the cooling area has 1section, each section is 2meters. The machine can be customized according to user’s production requirement. The machine has good drying performance, quick drying speed, high productivity, easy maintenance and safety using. For humid tropics weather conditions, our product lengthen the cooling open section, it is good for cooling of drying veneer, to avoid getting damp again. we can add or remove proper heating sections and adjust the heating type in order to meet your demands of production, concerning yield, arrangement and location. We’ll do our best to help you obtain the most producing capability with the least investment.
Features
1. This machine is one of the main machines for plywood production.
2. The dryer can effectively and evenly remove the moisture in the veneer to achieve the desired final moisture content.
3. The heating medium can be heat transfer oil or water vapor.
4. The whole machine can be divided into four parts: veneer infeed, veneer heating, cooling and veneer outfeed.
5. The Continuous Jet Veneer Dryer is designed to handle the drying process of face veneer, back veneer and long core veneer.
6. For process the surface veneer and long core veneer, this veneer dryer can avoid the break of the veneer, then can raise the veneer utilization ratio and production output.
7. All outfitted air blower and screen are the high quality production, so it can increase the durability and useful life of the machine.
8. We can design the machine upon our customer`s requirement, such as the decks and sections, but fire our customer should mention the production capacity they want, the initial moisture and final moisture.
9. Reasonable design and good parts make roller and mesh veneer dryer save energy and transfer heating fast.
10. The dryer machine uses the latest ultra-low noise centrifugal ventilator, reduce noise, good for workers.
11. The wind speed is faster and the air volume is higher, therefore the drying speed is much quicker.
12. Adopt variable frequency speed control, can adjust feed speed according your veneer thickness and moisture content, to get perfect drying effect.
13. The mesh is anti-rust, and can drying very thin thickness face veneer.
Product Parameters
Certificate
Customer Visits
We are very welcome you to visit the site and our factory
Pre-sale services:
1) Provide free consultation on the equipment
2) Provide the standard device and the flow chart
3) According to the clients’special requirement, offering a reasonable plan and free design to help to select the equipment
4) Welcome to visit our factory
Services during the sales:
1) Inspect the machine before leaving the factory
2) Oversea install and debug the equipment
3) Train the first-line operator
After-sale services:
1) 24 hours online service
2) Provide the VIDEO with Install and debug the equipment
3) Provide technical exchanging
When loading, we will share loading pictures to you. After vessel sails out, we will offer you container and vessel information. Offer all documents for you do custom clearance in the destination port.
Package:The normal package for machine is containers,nude package,but the spare parts is wooden box.If export to European countries,we will use PE film for packing it or according to your requests.
FAQ
Who are we?
We are leading manufacturer for veneer and plywood making machines located in Shandong, China. Start sell abroad from 1999, has our own technical team, sales teams, and after-sales service teams.
What can you buy from us?
The whole wood veneer & plywood production line, from log conveyor, log charger, log debarking machine, Single or Spindle less Veneer Peeling machine, veneer rotary clipper, auto veneer stacker, veneer drying machine, glue spreader, Pre-press machine, Hydraulic Hot Press, Plywood Sizer, Plywood sanding machine. Veneer Splicer, Knife Grinder, Hydraulic lift platform etc.
How can we guarantee quality?
The machine will have test running before put into warehouse and ready for shipment.
Why should you buy from us not from other suppliers?
Shine Machinery Veneer & Plywood Machine Manufacturing since 1999. High quality, high auto level, high working performance, long working life and good after-sales service
What services can we provide?
Accepted Delivery Terms: FOB, CFR, CIF, EXW；
Accepted Payment Currency: USD, EUR, CNY;
Accepted Payment Type: T/T, Irrevocable L/C at sight.
About Shine
Shandong Shine Machinery Co.,Ltd has more than 100 employees. The company’s headquarters is located in Gaotang Industrial Park, a beautiful water city in the north of the river, and the production plant covers a total area of 100 mu. The company specializes in the production of wood veneer dryers, bridge formwork, automated livestock and poultry breeding equipment, special equipment for the production of construction materials, etc. With the advantages of many years of research and development, production, service and production capacity, the company has always been in the leading position in the same industry. Shine Machinery provides high performance, high quality products and one-stop service for customers, and can tailor different products to meet the needs of customers in different situations and provide customers with fast and optimized system solutions.
The company is far-sighted and implements a modern enterprise management system, making use of new sales concepts and service systems. With an annual investment of 20 million in scientific research, the company joins forces with various industrial universities in China to study the application of high-end technology, so that the various products of shine Intelligence are always at the forefront of technology in the industry. The company is very strict about the quality of its products, and every piece of equipment it produces meets the ISO9001 quality management system certification. The company has large CNC gantry milling machine, data flame cutting machine, plane mill, universal milling machine, vertical and horizontal sawing machine and other large production equipment, the introduction of foreign advanced technology, so that “Shine” equipment with reasonable design, reliable performance, high quality, low energy consumption, easy to operate, high output and many other advantages. The company’s products have won the praise of our customers for their high precision and high cost performance.
