New Plywood Veneer Dryer Machine

The biomass burner is Shine patented product. It can burn all kinds of waste wood directly to reduce the drying cost mostly. Compared to steam type or heat conduction oil type veneer dryer, the drying cost is reduced greatly.


Shine Wood veneer dryer has the characteristics of ultra low fuel consumption, high productivity, energy efficiency and fast drying speed,etc. Veneer drying line not only solves the key problem of high fuel cost of veneer dryers machine, but also solves the serious problem of waste accumulation in wood processing plant. Shine roller veneer drying machine adopts the latest international pressure contact veneer drying technology to ensure the veneer is heated evenly.Shine veneer drying machine could work more effective and quality drying with lower power. We have patent for biomass burner, which can burn all kinds of waste wood directly to reduce fuel cost to the most. Traditional veneer dryers machine is easy to drop chain, card chain, veneer run off, heat exchanger is easy to plug. Veneer roller dryer can solve these problems during drying process and achieve lowest cost and perfect drying effect.

veneer dryer

Shine heat exchanger adopts step by step heat transfer, and the specifications of each section of the heat exchanger are different, and the hot air in the heat exchanger can be uniformly emitted to the veneer. The veneer after drying has uniform moisture content, flat, no buckle or end waviness;  free of splits and the surface is in good condition for gluing.

veneer dryer

veneer dryer

Shine Biomass Veneer dryer is product in the design of the continuous roller pressure type of hot air cylinder, it is using the most advanced continuous pressurized contact and its working principle is veneer veneer drying technology in steel tube under the clamping roller, two by preheating the oven temperature to 140, and then enter the upper and lower roller and through the hot air pipe to the single board upside down between hot high pressure blowing for quick dry, so you can make the veneer smooth moisture content after drying of uniform, And it has the characteristics of high temperature roller and wet veneer direct contact heat transfer, high thermal efficiency and small thermal loss.

Product Parameters

Model No


Working Width




Roller material

Q235B, φ89 steel pipe

Heating area length


Cooling area length


Veneer thickness


Veneer water moisture

Fresh veneer to about 10%

Heating material & drying temperature

Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent.

Drying capacity (m³/24h)


Veneer transport speed

5-22m/min16A chain

Hot air blower


Traction motor

Power: 7.5KWfrequency control2pc

Cold air blower

Power: 11KW1pc

Air intake fan

Power : 7.5KW2pc

4 ton biomass burner

Power: 16.5KW

Total power


Actual electricity consumption

About 100kwh per hour

Covered Space of the whole machine

42M X 9M X 3M

Main Features of Shine Roller Veneer Dryer

1. The veneer after drying by Shine veneer dryer is smooth and the moisture content is uniform, and the high temperature drum has direct contact with the wet veneer for heat transfer, and the heat efficiency is high, the heat loss is small, and the heat loss is reduced. the selling price for veneer dried by roller veneer dryer is higher than natural drying.
2.The roller veneer drying machine adopts frequency conversion to adjust feed speed according to your veneer thickness and moisture content to achieve ideal drying effect .
3.Shine core veneer dryer or face veneer dryer covers a small area, less ancillary equipment, convenient for transportation, quick installation, and can be put into use quickly and conveniently.
4.Standardized production models, can make different sections or decks according to different capacity requirements, which can meet different customers’ requirements.
5.Each section with heat exchanger, which can make full use of the heat and achieve the best drying effect.
6. The fuel source can be the waste wood after peeling or the tree bark ,which can reduce the fuel cost greatly for the user.

Customer Case

Customer Case

Customer Visits And Factory

Customer Visits


Our veneer dryers have won the CE certificates and exported to more than 20 countries such as Latvia, Thailand, Laos, Malaysia, Cambodia, Brazil, South Africa, South America and etc.



About Shine

Shandong Shine Machinery Co.,Ltd has more than 100 employees. The company’s headquarters is located in Gaotang Industrial Park, a beautiful water city in the north of the river, and the production plant covers a total area of 100 mu. The company specializes in the production of wood veneer dryers, bridge formwork, automated livestock and poultry breeding equipment, special equipment for the production of construction materials, etc. With the advantages of many years of research and development, production, service and production capacity, the company has always been in the leading position in the same industry. Shine Machinery provides high performance, high quality products and one-stop service for customers, and can tailor different products to meet the needs of customers in different situations and provide customers with fast and optimized system solutions.

The company is far-sighted and implements a modern enterprise management system, making use of new sales concepts and service systems. With an annual investment of 20 million in scientific research, the company joins forces with various industrial universities in China to study the application of high-end technology, so that the various products of shine Intelligence are always at the forefront of technology in the industry. The company is very strict about the quality of its products, and every piece of equipment it produces meets the ISO9001 quality management system certification. The company has large CNC gantry milling machine, data flame cutting machine, plane mill, universal milling machine, vertical and horizontal sawing machine and other large production equipment, the introduction of foreign advanced technology, so that “Shine” equipment with reasonable design, reliable performance, high quality, low energy consumption, easy to operate, high output and many other advantages. The company’s products have won the praise of our customers for their high precision and high cost performance.


A: We are a factory who manufacture the machines by ourselves.
A: Normally will be 30 days after getting deposit or original LC.
A: 1 year after delivery. We supply telephone after-sale service, video service and e-mail service. If can not deal with the problem, our tech-staff will go abroad to service.
A:a.T/T(30% deposit, 70% before delivery in FOB or 70% paid against copy of B/L in CFR) b. 100% irrevocable L/C at sight.
A: Welcome to visit us! Everyday we have customers from different countries. By now, we have exported to more than 50 countries customer.


What is 3+3?